Natural Stone Care Tools - Metal Bonded

Metal Bonded Natural Stone Care Tools

• Soft Surface tool consists of four diamond segments per tool to allow for lighter contact pressure, causing it to be aggressive on the softer concrete while achieving an acceptable life.
• Medium/Hard Surface tool is designed for medium/hard concrete and contains three diamond segments for proper stock removal on this category of concrete.
• Very Hard Surface tool contains two diamond segments for the maximum amount of contact pressure, allowing the diamond to work to its full potential on this challenging surface.

Edge Grinding Disc

• The 7" edge grinding disc can be used with any standard right angle grinder.
• With the same diamond matrix as the tools, this disc will allow you to grind the outer perimeter of the room or hard to reach areas with the same results.

PCD Surface Prep Tool

• The ultra aggressive PCD tool is designed for the removal of coatings and adhesives prior to coating or polishing.
• The tools are designed with a depth plate to prevent the PCD from gouging the floor. 

Conversion Plate

• The unique metal bonded conversation plate is machined to hold Norton tooling without the use of screws or other mechanical devices.
• The arbor configuration fits many machine models on the market.
• The three mounting holes in the plate allow the plate to be mechanically fastened to the bottom of any machine.